Formax 003 Aerosol Belt dressing, belt damaged can be caused by loose or because weve wear so that skid with Puli player. With Skid certainly will happen frictional losses and will accelerate the destruction of the belt and pulley where the belt was sendiri.Belt Dressing can extend the life of the belt.
Belt Dressing is used to add strength and prolong the service life of all kinds Belt (Belt): leather, rubber, canvas, plastic belt. Anti-slip, do not invite dust and prevent Belt to harden.
Machinery – Truck & Tractor – Railroads – Marine & Ship – Industry & Auto Shops – Plastic Industry – Rubbers Industry – Textile Industry – Woodworking – Food Industry – Foaming Industry etc.
Benefits Formax 003 Aerosol Belt Dressing
- Economical , Product packaged in cans so that aerosols can be used directly.
- Effective, Increase the workability and strength Belt (Belt) up to 50% Providing resistance to water (water proofment) and prevent slippage even in very humid conditions.
- Safe, Do not make the belt become bloated. Not inviting dust and dirt on the Belt. Do not make belt becomes hard still remain powerful. Works just fine on V, flat rubber or any kind of leather belt.
Indications / Uses
- Keep hands and clothing when spraying from a machine at work.
The surface of the belt to be sprayed must be clean.
- Spray cans with a distance of approximately 30 cm and spray it on the pulley or follow the whole of the surface of the belt.
- Keep aerosol cans from a place with a temperature over 120 o F (49 o C) .Isi pressurized cans, do not try to punch or throw it into the incinerator.
- How A More Advanced also be performed when the belt turns while checking the belt surface conditions that intersect with the mace has been very smooth and shiny. You can take rough sandpaper could be around the number 3 or 4, then sandpaper side of the belt with the direction and the vertical direction directly, Remember How It just cuman gives roughness on the surface side of the belt is not to diminish or soften!